ABS Sanimat 1000 Lifting Station ABS Pumps

1. Home
2. Products
3. Submersible Pumps
4. ABS
5. ABS Sanimat 1000 Lifting Station

ABS Sanimat 1000 Lifting Station Buy ABS Lifting Stations

Flood-proof, single lifting station, for the removal of wastewater and sewage from areas below the sewer level in accordance with EN 12050-1. Ideal for effective dewatering of houses with one or two living units and for new buildings or renovations.

---

Features

• Plug-in unit with earthed plug (230 V) or CEE plug (400 V) and phase sequence changeover facility.
• Easily transported and fitted. Compact dimensions allow passage through a standard door opening.
• Dynamic pressure level sensor on the tank, with separate sensors for inflow level and high water alarm.
• Trouble-free maintenance thanks to simple removal of the motor housing.
• Four horizontal inlet ports (2 x DN 100, 2 x DN 70) and two vertical (1 x DN 100, 1 x DN 150). Vertical vent line DN 70. DN 40 port is suitable for the connection of a hand membrane pump.
• DN 100 horizontal inlet ports are at different levels (180 and 220 mm) allowing for flexible installation connection.
• Direct toilet connection possible in the case of wall-mounted WC units.
• Discharge flange DN 80, plus flanged socket with 4” sleeve and clips (for discharge pipe DN80/100).
• Integrated valve system consisting of ball-type, non-return valve.
• Very quiet running thanks to 4-pole, slow-running motor.
• Vortex impeller with large free passage and rear blade mounting, for reliable pumping of both faecal and faecal-free sewage.
• Sloping container floor prevents deposits.
• Built-in mains alarm (visual and acoustic), can be converted to mains-independent by inserting battery.
• Maximum allowable temperature of the medium is 40 ºC; or up to 60 ºC intermittent (max. 5 minutes).

---

Tank

Corrosion resistant, gas- and odour-tight in accordance with EN 12050-1. Supplied as standard with pump, automatic level control and control box, non-return valve, 4” sleeve and flange.

Capacity: 70 litres

---

Motor

Water pressure sealed, squirrel cage 4-pole induction motor, with triple shaft seals and oil chamber. Electronic monitoring of stator temperature and overcurrent.

Insulation: Class F for 155 °C
Protection type: IP 68

---

Materials

Description	Material
Tank	Polyethylene (PE)
Motor Housing	Cast iron EN-GJL-250
Rotor Shaft	Stainless steel 1.4021 (AISI 420)
Volute	Polyethylene
Impeller	Cast iron EN-GJL-250

---

Technical Data

Sanimat	1000W	1000D	1000D/HD
Discharge connection	Sleeve 4” DN 100	Sleeve 4” DN 100	Sleeve 4” DN 100
Motor power (kW)*	P1 = 1.80 P2 = 1.30	P1 = 1.77 P2 = 1.40	P1 = 2.88 P2 = 2.20
Speed (r/min)	1450	1450	1450
Rated voltage (V)	220-240 1~	400 3~	400 3~
Rated current (A)	8.4	3.5	5.2
Cable length (m)**	4 + 1.5	4 + 1.5	4 + 1.5
Weight (kg)***	55	55	57

* P1 = Power taken from mains; P2 = Power at motor shaft;
** Tank to control unit 4 m, control unit mains 1.5 m;
*** Additional weight with hand membrane pump = 13 kg

---

Downloads

• ABS Sanimatt 1000 - lifting station Data Sheet