ABS Sanimat 2002 Lifting Station ABS Pumps

1. Home
2. Products
3. Submersible Pumps
4. ABS
5. ABS Sanimat 2002 Lifting Station

ABS Sanimat 2002 Lifting Station Buy ABS Lifting Stations

Flood-proof, double lifting station, for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1. Ideal for effective dewatering of domestic residences or commercial developments. Suitable for new installations or for renovation of old buildings.

Flood-proof, double lifting station, for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1. Ideal for effective dewatering of domestic residences, large buildings or commercial developments. Suitable for new installations or for renovation of old buildings.

---

Features

• Plug-in unit with CEE plug and phase sequence changeover facility.
• Easily transported and fitted. Compact dimensions allow passage through a standard door opening.
• Dynamic pressure level sensor on the tank, with separate sensors for inflow level and high water alarm.
• Trouble-free maintenance thanks to simple removal of the motor housing.
• Vortex impeller with large free passage for reliable pumping of both faecal and faecal-free sewage.
• Option of 2- or 4-pole motors.
• Direct toilet connection possible in the case of wall-mounted WC units.
• One variable inlet (DN 150) with 90° elbow, two horizontal (DN 150), and five vertical (2 x DN 100/150, 2 x DN 70, 1 x DN 40). One DN 70 port is needed as a vent line. DN 40 port is suitable for the connection of a hand membrane pump.
• Discharge flange DN 80, plus flanged socket with 4” sleeve and clips (for discharge pipe DN80/100).
• Sloping container floor prevents deposits.
• Integrated valve system consisting of two ball-type, non-return valves.
• Built-in mains alarm (visual and acoustic), can be converted to mains-independent by inserting battery.
• Maximum allowable medium temperature 40 °C; or up to 60 °C intermittent (max. 5 minutes).

---

Tank

Synthetic, corrosion-resistant, gas- and odour-tight tank in accordance with EN 12050-1. Supplied as standard with pumps, junction piece with integral non-return valve system and cleaning openings, 4” sleeve and flange, automatic level control and control panel.

Capacity: 320 litres

---

Motor

Water pressure sealed, squirrel cage 2- and 4-pole induction motor, with triple shaft seals and oil chamber. Electronic monitoring of stator temperature and overcurrent.

Insulation: class F for 155 °C
Protection type: IP 68

---

Materials

Description	Material
Tank	Polyethylene (PE)
Motor Housing	Cast iron EN-GJL-250
Rotor Shaft	Stainless steel 1.4021 (AISI 420)
Volute	Polyethylene
Impeller	Cast iron EN-GJL-250

---

Technical Data

2002 D/XD

Sanimat	2002D/HD
Discharge Connection	Sleeve 4” DN 100	Sleeve 4” DN 100
Motor power* (kW)	P1 = 2.88 P2 = 2.20	P1 = 3.70 P2 = 3.00
Speed (r/min)	1450	1450
Rated voltage (V)	400 3~	400 3~
Rated current (A)	5.2	6.2
Cable length (m)**	4 + 1.5	4 + 1.5
Weight (kg)***	132	132

* P1 = Power taken from mains; P2 = Power at motor shaft
** Tank to control unit 4 m, control unit mains 1.5 m
*** Additional weight with hand membrane pump = 13 kg

---

Downloads

• ABS Sanimat 2002 - lifting station Data Sheet