ABS Synconta 901 - 902L Lifting Station ABS Pumps

1. Home
2. Products
3. Submersible Pumps
4. ABS
5. ABS Synconta 901 - 902L Lifting Station

ABS Synconta 901 - 902L Lifting Station Buy ABS Lifting Stations

Designed as a complete wastewater sump for below-ground installation and for fitting with ABS pumps from thePiranha and AS ranges.

---

Features

• Installed with a concrete lid, outside the building in open ground. Synconta is suitable for installations according to EN 124; Group 1 permissible traffic tonnage 5 kN/m2. Maximum permissible outside pressure 0.4 bar.
• Stainless steel discharge pipe with 2” external thread.
• Synconta 901: one pump, 902: two pumps. Standard depth version - 1690 mm.
• Synconta 901L: one pump, 902L: two pumps. Maximum depth version - 2190 mm.
• Eight inflow ports (4 x DN 100, 4 x DN 150) for DIN push-on connection. One DN 100 port reserved for venting and use as a cable duct.
• Simple pump installation and maintenance, it is not necessary to enter the sump. The pump seals automatically onto the discharge line when lowered into the high level coupling.
• Pneumatic level control system.
• Maximum allowable temperature of medium 40 ºC, short term to 60 ºC (max. 5 minutes).

---

Tank

Synthetic, corrosion-resistant tank in accordance with EN 12050-1. Supplied as standard with high-level coupling and bracket, ball type non-return valve, shut-off valve and pneumatic level control. Tank cover and pump(s) not included.

Capacity (L):
945 (Synconta 901 & 902)
1250 (Synconta 901L & 902L)

Weight (kg)*:
85 / 96 (Synconta 901 / 902 DN 32)
96 / 121 (Synconta 901 / 902 DN 50)
116 / 127 (Synconta 901L / 902L DN 32)
127 / 152 (Synconta 901L / 902L DN 50)
* Includes installation pipework but not weight of pump

---

Motor

Water pressure sealed, squirrel cage 2- and 4-pole induction motor with triple shaft seals and oil chamber. Electronic monitoring of stator temperature and overcurrent.

Insulation: Class F to 155 ºC
Protection type: IP 68

---

Pump Types

• ABS submersible wastewater pump AS. With Contrablock or vortex hydraulics for pumping clear water, wastewater and sewage with large solid particles present. Up to 60 mm solids passage.
• ABS Piranha submersible grinder pump. Shredding system hydraulics which can cut and pump wastewater containing solids through small diameter discharge lines from 1¼”.

---

Materials

Description	Material
Tank	Polyethylene (PE)
AS
Motor Housing	Cast iron EN-GJL-250
Rotor Shaft	Stainless steel 1.4021 (AISI 420)
Volute	Cast iron EN-GJL-250
Impeller/Bottom plate	Cast iron EN-GJL-250
Fasteners	Stainless steel 1.4401 (AISI 316)
Piranha
Upper Lid *	Stainless steel 1.4301 (AISI 304)
Motor Housing	Cast iron EN-GJL-250
Rotor Shaft	Stainless steel 1.4021 (AISI 420)
Volute	Cast iron EN-GJL-250
Impeller **	Cast iron EN-GJL-250
Fasteners	Stainless steel 1.4401 (AISI 316)