- Home
- Products
- Submersible Pumps
- ABS
- ABS MF 054-804 W/KS
ABS submersible pumps of the MF series with their large solids passage offer quality, reliability, performance and ease of installation.
| Type key Example: |
| MF |
Wastewater Submersible Pump |
| 054 - 804 |
20 mm (MF 054/154),
30 mm (MF 254/324/
334),
40 mm (MF 54/404/504/604/804)
60 mm (MF 565/665) |
W
D |
AC 1~ 230V. 50Hz
AC 3~ 415V. 50Hz |
| KS |
With / Without Floatswitch |
Quick Specs:
| Specifications |
| Flow up to: |
40 m³/h |
| Head, Max: |
16m |
ABS submersible pumps of the MF series with their large solids passage offer quality, reliability, performance and ease of installation, covering a wide range of dewatering applications tailored to meet the needs of ABS customers
Applications
- ABS submersible pumps of the MF series have been designed for the economical reliable dewatering of buildings and sites
- Pumping effluent from locations below the backwash level in accordance with standard DIN/EN 12056
- Filling or emptying containers
- Suitable for use in septic tanks
- For the emptying of flooded cellars
- For drainage
- For pumping of rainwater
The Vortex hydraulics are particularly suitable for the pumping of fluids containing gaseous or abrasive particles.
For use on building sites, the MF 354, MF 504; MF 804 are also available as VO-versions with screen and hose coupling.
Economic installation, thanks to its compact shape, small sump requirements, fittings for easy mounting and short installation time.
The water tight fully flood proof cast iron motor and the hydraulics section comprise a compact robust unit construction.
Motor
Three-phase 400 V3~ or single-phase 220-240 ~V, 50 Hz, 2-pole (2900 min -1 ), insulation class F, protection type IP68.
Bearings
>
The stainless steel rotor shaft is supported in lubricated-for-life ball-bearings.
Shaft sealing
Between motor and hydraulic section by means of high quality mechanical seal, carbon / silicon carbide (MF054- MF334) and silicon carbide (all others), independent of direction of rotation and resistant to temperature shock. Motor side: oil lubricated lip seal.
Temperature monitoring
>
TCS-Thermo-Control-System with thermal sensors in the stator to switch off the pump in the case of over-heating and switch on automatically after cooling down.
Hydraulic section with Vortex impeller
>
Free solids passage 20 mm (MF 054/154), 30 mm (MF 254/324/ 334), 40 mm (MF 054/404/504/604/804) and 60 mm (MF 565/665).
Medium temperature
Max. 40° C continuous use, 60° C intermittent use (max. 5 min).
- Simple cost-effective pump installation
- Vortex hydraulics for blockage-free pumping in critical applications
- Free standing or pedestal usage
- Reliable, quality products
- Mechanical seal standard
- Excellent after-sales service and support
- Range of discharge sizes from G 1¼” to DN 65
- Thermal sensors as standard to protect motor
- Plug and Play (caps in motor head)
- Vortex impeller with 20mm solids handling
- Mechanical seal fitted
- Robust and reliable
Downloads
