ABS Sanisett 1 and 2 Lifting Station

Synthetic, single or twin pumping station, for the effective dewatering of buildings and areas below the sewer level in accordance with EN 12050-2

Type key Example:
Sanisett	Synthetic Pumping Station
1 or 2	Single Pump or Twin Pump
Pump Type:
Robusta	Light Drainage Pump (10 mm solids)
Coronada	Light Drainage Pump (10 mm solids)
MF	Light Wastewater Pump (upto 60 mm solids)
Piranha	Grinder Pump

Quick Specs:

Get a Price

Specifications
Flow up to:	30 m³/h
Head, Max:	21m

Synthetic, single or twin pumping station, for the effective dewatering of buildings and areas below the sewer level in accordance with EN 12050-2. Designed as a complete wastewater sump for above- or below-ground installation and for fitting with ABS pumps from the Robusta, Coronada, Piranha and MF ranges. The Sanisett 2 is suitable also for the pumping of sewage containing faecal matter outside of areas covered by EN when installed using Piranha pumps.

Features

Globular shape for extra strength. Below-ground version has manhole cover with floor run-off and option of odour lock with aeration and venting. Above-ground version with plastic lid (accessory).
Universally adjustable in height and can be swivelled, thus allowing easy alignment with floor levels and tiling patterns, independent of the inflow or direction of the discharge lines.
Sanisett 1 for one KS version pump (Coronada, Piranha, MF) or pump with built-in level control (Robusta).
Sanisett 2 for two non-KS pumps. Separate KS level control system, with support bracket for discharge line junction piece and KS float switches.
Two inflow ports at 90º offset (DN 100/150) for DIN push-on connection. One port DN 70 for venting and use as a cable duct (supplied as standard with plug/cable inlet seal). One discharge port DN 50 with 63 mm Plasson adaptor.
Plastic cover for protection of the floor grating during installation work supplied as standard.
Heads up to 20 m with Piranha 08/09 pumps.
Maximum allowable temperature of medium 40 ºC, short term to 60 ºC (max. 5 minutes).

Tank

Synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-2. Supplied as standard with cover, seals, junction piece, pipe adapters and support bracket. Pump(s) and installation kit not included.

Capacity: 180 litres
Weight: 14 kg (without pump)

Motor

Water pressure sealed, squirrel cage 2-pole induction motor.

Insulation: Class F to 155 ºC
Protection type: IP 68

Pump Types

ABS Robusta light drainage pump 200 WTS, for pumping of ground and rain water, water from hand-basins, and washing machine effluent. (10mm solids passage.)
ABS Coronada light drainage pump 250 WKS. For wastewater (as Robusta above), but suitable also for aggressive ground water thanks to the stainless steel pump housing and a mechanical seal for shaft sealing. (10mm solids passage.)
ABS light wastewater pump MF 154 W to 804 D, for wastewater with large solid particles present. (Up to 40 mm solids passage.)
ABS Piranha submersible grinder pump 08/09 with heads up to 20 m which can be used to cut up and pump wastewater containing solids.

Materials

Description	Material
Tank	Polyethylene
Robusta
Pump Housing	PP
Rotor Shaft	Stainless steel 1.4028 (AISI 420)
Impeller	PA
Seals	NBR
Cable	Neoprene
Coronada
Pump Housing	Stainless steel 1.4301 (AISI 304)
Motor Housing	Stainless steel 1.4301 (AISI 304)
Rotor Shaft	Stainless steel 1.4305 (AISI 303)
Impeller	PPO
Cable	Neoprene
Piranha 08/09 and MF
Upper Lid	Stainless steel 1.4301 (AISI 304)
Motor Housing	Cast iron EN-GJL-250
Rotor Shaft	Stainless steel 1.4021 (AISI 420)
Volute	Cast iron EN-GJL-250
Impeller *	Polyamide
Seal	Neoprene
Fasteners	Stainless steel 1.4401 (AISI 316)

* Piranha 09: cast iron EN-GJL-250

Downloads

ABS Sanisett 1 and 2 - lifting station Data Sheet

Sulzer Muffin Monster

Inline / Open Channel Grinders

Muffin Monster sewage grinders represent the best-in-class technology for wastewater solids reduction.

Sulzer Muffin Monster Sulzer Muffin Monster 10K Sulzer Muffin Monster 30K Sulzer Muffin Monster 40K

ABS Pumps Only

ABS Robusta and Wastewater pumps

Whether you need to pump wastewater from a single building or you have a multi-site location, you can be certain that ABS has a product to meet your pumping requirement.

ABS Robusta 1 ABS MF 154HW Wastewater Pump for Hot-Water ABS Robusta 200 & 300 ABS Coronada Drainage Pump ABS Drainage Pump IP ABS Wastewater Pump MF ABS Piranha Grinder pump ABS Wastewater Pump AS ABS AFP Sewage Pumps ABS EffeX (XFP) Sewage Pumps ABS AFP SX Sewage Pumps ABS Drainage Pump J, JC, JS & JT

ABS Pumps Lifting Stations

Buy ABS Sanimat Lifting Stations

Whether you need to pump wastewater from a single building or you have a multi-site location, you can be certain that ABS has a product to meet your pumping requirement.

ABS Lifting Station Nirolift ABS Sanimax MF-HW Hot-Water Lifting Station ABS Lifting Station SANISETT ABS Lifting Station Piranhamat 100/120 ABS Lifting Station Piranhamat 701 ABS Lifting Station Sanimax ABS Lifting Station Sanimat 1000 ABS Lifting Station Sanimat 1002 ABS Lifting Station Sanimat 2002 ABS Lifting Station Sanimat 1500 - 3700 ABS Lifting Station Synconta 700/700L ABS Lifting Station Synconta 801 ABS Lifting Station Synconta 901-902L

ABS Sanisett 1 and 2 Lifting Station ABS Pumps