- Home
- Submersible Pumps
- Xylem
- Sekamatik
- Sekamatik 10
- Lowara Sekamatik 10E 8M
COMPACT DRAINAGE WATER AND EFFLUENT DISPOSAL UNIT WITH STAINLESS STEEL SUBMERSIBLE PUMP
Overview.
The Sekamatik 10E 8M compact mini pump station is designed to remove wastewater from hand basins, washing machines, urinals, bidets, showers, bathtubs and dishwashers in basements, apartments or cellars which are below the sewer backflow level. The Sekamatik 10E 8M is also suitable for installation of sanitary facilities according to DIN EN 12050-3. The built-in stainless steel drainage pump operates automatically by a float switch control. The DN 25 discharge can be easily installed with minimum construction work. The Sekamatik 10E 8M compact design allows installation directly under the hand basin, where space is at a premium. The new tank design with separate dry area allows easy access if servicing is required.
DIN EN 12050-3: Conformity and design approved and controlled by LGA.
Pumped liquid: Domestic drainage water and effluent.
Operation: Intermittent.
Specifications
Compact domestic effluent disposal unit comprising:
Collection Tank: Odour-tight plastic collection tank with separate dry area. Maximum utility volume 11 liters. One top inlet DN 40. Two lateral inlets DN 40 with integrated non-return valve and sealing ring. DN 25 discharge diameter with integrated ball backflow preventer. Air vent with activated carbon filter.
Pump: Single-stage centrifugal stainless steel pump with horizontal discharge.
Motor: Single-phase electric motor with thermal sensors embedded in the winding. Insulation Class B. Stainless steel rotor shaft, pre-lubricated bearings.
Shaft Seals: Triple lip-seals.
Controls: Pneumatic level control with control electronics. Seal monitoring, alarm signal and runtime monitoring.
Materials
| Collection tank |
Composite |
| Pump housing |
Glass fibre reinforced composite |
| Impeller |
Glass fibre reinforced composite |
| Motor housing, |
Stainless steel 1.4301 |
| Rotor shaft |
1.4021 |
Technical Data
| Motor input P |
650 W |
| Motor output P |
350W |
| Voltage |
230V-240V/1Ph 50Hz |
| Speed |
2900 rpm |
| Nominal current |
2,6 A |
| Cable |
H 03VV-F3x0,75 |
| Insulation Class (complete appliance) |
IP 44 |
| Weight |
8 kg |
| Discharge |
DN 25 (o.d. 28-34 mm) |
Equipment supplied
Tank with pump, with ball backflow preventer, flexible connection piece and terminal clamp, 1,4 m of cable with plug, non-return valves.
Performance
Installation
Dimensions
(all dimensions are in mm.)
- Tank cover
- Air vent with activated carbon
filter
- Connection for inlet DN 40
(Ø40)
- Connection for DN 25 discharge
pipe with integrated ball
backflow preventer
- Cable inlet
- Connection for hand basin
DN 40 (Ø40)
