ABS Submersible Drainage Pump J, JC, JS & JT ABS Pumps

ABS submersible drainage pump J 5 - 604 and JC 24 - 84 are suitable for pumping water and dirty water mixed with soil.

Type key Example:
J & JC pumping water and dirty water mixed with soil
JS pumping sludge and water mixed with solids
JT pumping sludge and water mixed with solids.
Quick Specs:
Specifications
Flow up to: 1,200 m³/h
  Head, max 90m
Head, Max: 90m

Choose ABS and you will get much more than just the right pump. In a world where time is money, fast dewatering of a worksite is crucial. We can help you plan for efficient dewatering, in virtually any situation – construction sites, tunnels, mines, shipyards and dry docks.

ABS, interest in dewatering runs deep, but we do realize that for many users the main concern is for the water to go away - the sooner, the better. Let us worry about flow rates, pump selection, energy consumption and other specs. We will provide you with the best and mostefficient solution.

More than 40 years of technical and real-world experience, has resulted in a complete range of submersible dewatering pumps. Changing needs over the project duration can make financing of a dewatering project a real challenge. At ABS we offer pump solutions that include purchase, rental and service. By making use of our extensive network of service centers and partners, problems can be resolved quickly and efficiently without disruptions to your schedules.

ABS Submersible Drainage Pump J & JC

ABS submersible drainage pump J 5 - 604 and JC 24 - 84 are suitable for pumping water and dirty water mixed with soil. When delivered to a site you can start using them right away. The low weight and compact design vouches for convenient transport, handling and installation. Just plug and pump!

1 Easy start
– plug-in without worrying about overheating Built-in contactor connected to the thermal sensors in the stator windings protects the motor from overheating and features an automatic restart function.

2 Wear resistance
– one investment, years of cost efficient pumping Impeller in high chrome alloy steel with full upper shroud and adjustable wear parts in oil resistant nitrile rubber secure a long lifetime and high efficiency.

3 Reliable operation
– minimizes time for maintenance Double outer casing and good heat convection enables pump to operate continuously at low levels or even run dry without damaging the motor. First class materials like outer casing in stainless steel, cast parts in lightweight aluminium alloy, mechanical shaft seals in silicon carbide grant a pump you can rely on.

4 Serviceability
– save time and money by easy onsite service Due to modular design, the same parts can be used for different pumps, which lowers overall service costs. By removing the top cover of the pump you can easily check the electrical junction box. For protection the motor is separately sealed from the junction box. Environmentally safe white oil is used in the oil casing for easy inspection of seal conditions. For J205
and J405 service is made even easier due to a mechanical seal cartridge.


ABS submersible sludge pump JS

ABS submersible sludge pump JS 12 - 84 are excellent for pumping sludge and water mixed with solids. They have a slim design and low weight, which makes them easy to move and easy to handle. Once a JS pump is installed it can run without risk of overheating the motor or sludge clogging.

1 Easy start
– plug-in without worrying about overheating Built-in contactor connected to the thermal sensors in the stator windings protects the motor from overheating and features an automatic restart function.

2 Clog-free pumping
– avoid downtime with solid proof hydraulics Equipped with a free flow vortex impeller and a pump volute, the JS is perfect for pumping solids. The impeller is available in different sizes to meet your specific requirement. Max impeller diameter requires half motor or more submersed for continuous duty. (Pump can operate lying down.) Smaller impeller diameter for duty with low water level or intermitent dry running.

3 Reliability and wear resistance
– one investment, years of costefficient pumping Both impeller and pump housing are made from wear resistant ductile iron for maximum wear resistance and durability. Double mechanical shaft seal in oil bath with primary seal in silicon carbide secure safe operation and long life.

4 Convenient handling
– designed to make your life easier All motor parts are made in light weight aluminium, which provides a pump that is very easy to handle and install.

5 Serviceability
– save time and money by easy and on-site service Due to modular design, the same parts can be used for different pumps, which lower overall service costs. By removing the top cover of the pump you can easily check the electrical junction box. For protection the motor is separately sealed from the junction box. Environmentally safe white oil is used in the oil casing for easy inspection of seal conditions.


ABS submersible sludge pump JT

ABS submersible sludge pump JT 15 - 250 are suitable for pumping sludge and water mixed with solids. The robust cast iron design provides a sturdy pump for rough conditions. The pump runs at any water level without overloading the motor.

1 Dry running capability
– no need for pump operation checks Closed cooling jacket systems and an automatic stop and restart function with starter box enables dry running without damaging the mechanical seals or motor.

2 Clog-free pumping
– avoid downtime with solid proof hydraulics Equipped with a free flow vortex impeller and a pump volute, the JT is excellent for effective pumping of solids.

3 Convenient handling
– designed to make your life easier The stand in nodular cast iron and the stainless steel handle makes the JT easy to move and install. A hose or quick coupling is easily connected to the discharge connection supplied with the pump.

4 Reliability
– one investment, years of cost efficient pumping ABS vortex hydraulic requires no adjustment of impeller/wear plate. It minimizes load on shaft and bearings, which ensures reliable operation and maintained efficiency. All JT sludge pumps have mechanical seal in silicon carbide securing safe operation and long life.

5 Serviceability
– save time and money with easy and on-site service Modular design enables usage of the same parts for different pumps, which lowers overall service costs and increases flexibility. ABS JT40-250 pumps have mechanical seal cartridge, simplifying service on site

6 Safety features
– minimizes unpleasant consequences All JT sludge pumps are available in explosion proof EExd IIB T4 / ATEX versions. The oil housing on the JT15 - 30 is filled with safe white oil and on the JT 40 - 250 with environmentally safe glycol coolant.

Tell us your need. We provide the solution.

  • What you are pumping
  • Requested flow
  • Site conditions
  • Time schedules
  • Availability and logistics
  • Need for emergency or back-up service
  • Suitable mix of rent & buy
  • Project planning
  • Purchase, rental or leasing

Downloads


Featured ABS Pump Learn more

ABS Piranhamat 701 Lifting Station Sewage Lifting Plant

Quick Specs:

Suitable for the removal of liquids containing solid particles up to 30 mm from wash-hand basins, domestic washing machines, or showers, from areas below the sewer level in accordance with EN 12050-2.

  • Ready-for-use, plug-in unit with EURO plug
  • Compact triangular design optimises space beneath a washhand basin
  • Solids handling up to 10 mm for Robusta, 20 mm for MF 154, and 30 mm for MF 324
  • Odour-tight lid with odour lock and venting, including charcoal odour filter and overflow protection
  • Alarm float switch available as accessory

Residential Customers

Commercial

Schools

Local Authority

Retail

Hotels

Resturants

New Building Developments

Industrial Estates

Call Our Sales Team Now: 020 8991 6650