ABS Sanimax MF-HW Lifting Station

Complete wastewater pumping unit for installation at floor level, and fitted with a submersible MF-HW hot water pump.

Suitable for the removal of high temperature liquids containing solid particles up to 20 mm, from domestic and commercial appliances located below the sewer level, in accordance with EN 12050-2.

Technical Data:
Motor power (kW) P1 = 0.65 P2 = 0.42
Speed (r/min) 2900
Rated voltage (V) 220-240 1~
Rated current (A) 2.8
Cable type (H07BN4-F) F3G1.0
Cable length (m) 3
Weight (kg) 13.5
Quick Specs:
Switching and Volume Levels
ON (mm) 230
OFF (mm) 80
Pumped volume (L) 11.2
Residual volume (L) 4.5

It will start pumping at a water level of 20 mm and pump away residual water to 1 mm. The actual level of the residual water may vary depending on factors such as surface texture and composition, evenness of surface etc.


Features

  • Ready-for-use, plug-in unit with Schuko plug.
  • Compact triangular design optimises space.
  • Fitted with MF 154HW pump, complete with non-return valve and level control. A separate check valve should be used at heads over 3 m.*
  • Solids handling up to 20 mm.
  • Pumping of high temperature wastewater up to a maximum of 80 °C.
  • Seven ports (5 x 40 mm, 2 x 50 mm), ready-prepared with seals, which can be used for inflow, discharge, power cable, or flexible hose connection to a washing machine (¾" adaptor supplied).
  • Odour-tight lid with odour lock and venting, including charcoal odour filter and overflow protection.
  • Alarm switch available as accessory.

Tank

Synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-2. Supplied as standard with pump, automatic level control and non-return valve. Capacity: 28 litres


Motor

Water pressure sealed, squirrel cage 2-pole induction motor, with double shaft seals and oil chamber. Electronic monitoring of stator temperature and overcurrent. Insulation: Class F (155 ºC). Protection type: IP 68


Installation

Attention to the backwash level is of vital importance for effective dewatering. All outflow points located below the backwash level must be protected against back flow according to standard EN 12056.


Performance curve


Downloads


Featured ABS Pump Learn more

ABS Piranhamat 701 Lifting Station Sewage Lifting Plant

Quick Specs:

Suitable for the removal of liquids containing solid particles up to 30 mm from wash-hand basins, domestic washing machines, or showers, from areas below the sewer level in accordance with EN 12050-2.

  • Ready-for-use, plug-in unit with EURO plug
  • Compact triangular design optimises space beneath a washhand basin
  • Solids handling up to 10 mm for Robusta, 20 mm for MF 154, and 30 mm for MF 324
  • Odour-tight lid with odour lock and venting, including charcoal odour filter and overflow protection
  • Alarm float switch available as accessory

Residential Customers

Commercial

Schools

Local Authority

Retail

Hotels

Resturants

New Building Developments

Industrial Estates

Call Our Sales Team Now: 020 8991 6650