Sewage Pumping Station Servicing London | Tanker Pump Out & Maintenance

Sewage Pumping Station Servicing London | Tanker Pump Out & Maintenance

Sewage Pumping Station Servicing London – Tanker Pump Out Specialists

Reliable, fully compliant rain water and foul water pumping station servicing across Greater London and Home Counties including full chamber emptying, tanker pump outs, jetting, and basement pump station maintenance for residential, commercial, and managed properties.

Call 0208 991 6650 · Request a quote

Overview

Regular servicing keeps pump stations running reliably and prevents costly failures. After a decade of annual maintenance, this North London basement pump station has operated trouble free. We recommend annual inspections for low use stations and more frequent visits for high use or commercial sites. Every other year we advise a full pump out and jetting tanker service to remove fats, oils and grease (FOG) and non biodegradable debris.

What We Do

  • Planned maintenance including mechanical and electrical checks.
  • 24/7 emergency response for pump failures and blockages.
  • Tanker pump out and jetting to remove FOG, rags and sediment.
  • Repairs and replacements of pumps, motors and control equipment.
  • Compliance reporting with photographic evidence and service certificates.

21 Point Pumping Station Service Check

Our comprehensive service package covers mechanical, electrical and operational checks. Engineers complete a full inspection and provide photographic service report and recommended spares if required.

  1. Lift pump(s), clean pump and check pump data plate
  2. Inspect pump volute for damage
  3. Inspect impeller for debris and damage; unblock as required
  4. Check wear ring(s) for damage
  5. Assess motor and pump bearing condition
  6. Remove oil drain plug and inspect oil for water ingress (where applicable)
  7. Refit oil drain plug with new O'ring; refill or replace oil (where applicable)
  8. Test motor windings for continuity and insulation integrity
  9. Inspect motor cables for wear and water ingress
  10. Check and clean level control floats and ultrasonic heads
  11. Inspect pump lifting system for serviceability
  12. Check operation of isolation and non return valves
  13. Inspect wet well pipework condition
  14. Inspect wet well and valve chamber including access covers
  15. Inspect and service pump control panel
  16. Adjust pump controls where necessary
  17. Test all safety and alarm facilities
  18. Measure earth loop resistance and electrical safety checks
  19. Clean control panel
  20. Inspect control panel kiosk condition (where applicable)
  21. Clean chamber and remove items that could cause blockages
  22. Optional: desludging via tanker pump out and jetting

On this visit the stepping relay had exceeded its service life and was replaced to restore reliable automatic operation.

Back to Blog Home


Residential Customers

Commercial

Schools

Local Authority

Retail

Hotels

Resturants

New Building Developments

Industrial Estates

Call Our Sales Team Now: 020 8991 6650