Available From £1,945.00 EX VAT
|
SPSE/1017/40EM GRP Single Pumpset - Economy Macerator Packaged Pump System“SPSE 1000EM range†GRP packaged pump station for collection and pumping of domestic wastewater water, foul and sewage from a single development or areas where drainage by gravity is not possible. Applications
SPSE 1000EM Economy macerator pumpstationSPSE1000EM Range of GRP 'Packaged Pump Station' installed with 40mm flexible pipework, 40mm non return valve and gate valve, high level quick-fit union, free standing Mmcerator submersible pump c/w integral floatswitch 1ph 230v option only single pumpset. 1.0mtr Dia x 1.7mtr Deep GRP Chamber as standard additional depths available on request, up to 2.5mtrs deep minimum tank depth of 900mm Free standing DN40 macerator pump with integral floatswith for duty only operation, optional High-level alarm unit C/W Floatswitch 10mtrs cable or shelf spare pump at extra cost Pressed steel access cover and frame is included, additional cost apply for upgrading to either A15 pedestrian rated , B125 medium duty, D400 heavy duty or recessed for block paving. Access covers and frames are supplied lose and should be independently supported over the pump chamber by others. PUMP SUPPLIED FREE STANDING 1PH 240V WITH INTEGRAL FLOATSWITCH ServicingWe are able to provide details of our Service Schedule; this is required to maintain your pumping station in its optimum condition. SPSE Service scheme provides for regular visits throughout the year and includes for labour and travel. Any additional parts and materials are charged at the quoted price, Any parts replaced during the first 12 months, as a result of normal wear and tear, are covered under our standard warranty replacement. |
Specifications: | |
---|---|
Wet Well Construction | GRP Chamber |
Wet Well Diameter | 1000mm |
Chamber Depth | 1.7M as standard (1.35M - 2.5M deep) available on request |
Pump Station Pipework | 50mm internal flexible pipework, top quick-fit union, galvanised discharge connection |
Pump Station Valves | 50mm BSP NRV / 50mm BSP Gate Valve |
Pump Discharge | 11/4" BSP |
Access Cover | Pedestrian Rated - Pressed Steel additional options available on request |
Opening Size | 600mm x 450mm |
Number of Pumps | One DN32 Discharge |
Pump Arrangement | Submersible Free Standing C/W High Level Quick Fit Union |
Power Supply | 220v, 1phase 50hz ONLY |
Control Panel | No panel included, Optional cost for High-level alarm unit C/W Floatswitch |
Duty Regime | Duty Only |
Level Control | Integral Floatswitch |
Above Equipment Supplied as Standard
We can supply explosion-proof submersible pumps and electrical equipment at additional cost.
Should you require further information regarding any of our products or services we offer, call: 020 8991 6650.
Cant find what youre looking for ? click here to email us your requirementsSite attendance in which to complete mechanical and electrical installation works to pumping station plus commissioning systems once the electrical supply has been installed just complete the form below and we will contact you to arrange a day to suit your schedule.
Pump Station Pre-Commissioning Site Check List
Pump Station Installation Guide
Additional cost may apply for returning visits.
Cabling for both pump power and float controls with IP66 junction boxes, as required should power location, control panel be over 5-metres from pump station.
Additional costs apply.
Battery backup 9V high level alarm C/W 10mtrs Dual action floatswitch.
Additional costs apply.
Standby pump - shelf spare backup pump for direct replacement of pump failure for SPSE/Economy Stations
Additional costs apply.
Kiosks are manufactured from 2mm-zintec sheet steel to BS6687-1968 (chromate washed - substrate BS1449 -2.5 microns), the kiosks are press formed and welded construction to IP55 of BS5490 to give good earth continuity.
The following extras can be fitted as an extra option
We also provided other materials of construction (314 and 316) stainless steal and different sizes, contact us for further details
Access Covers Pressed Steel supplied as standard
Additional cost apply for upgrading to either A15, B125 medium duty or D400 heavy duty access covers
Additional costs may apply.
Should you require further information regarding any of our products or services we offer, call: 020 8991 6650.
Cant find what youre looking for ? Click here to email us your requirements