Available From £5,943.00 EX VAT
SPSE/1020/D/32M GRP Dual macerator Pumpset - Packaged Pump System
â€œSPSE 1000 rangeâ€ GRP packaged pump station for collection and pumping of municipal, industrial and domestic surface, wastewater water, foul and sewage from developments or areas where drainage by gravity is not possible.
SPSE 1000 pumpstation
SPSE1000 Range of GRP 'Packaged Pump Station' installed with 40mm galvanised steel pipework, 40mm non return valves and gate valve, two pump chains, four floats switches, dual pump control panel, guide rail pedestal mounted macerator pumpset for quick and easy removal of pumps only for servicing or cleaning.
1.0mtr Dia x 2.0mtr Deep GRP Chamber as standard additional depths available on request, up to 6.5mtrs deep minimum tank depth of 900mm
Dual Pumps for backup on pump failure, control panel can be configured for Duty/Standby or Duty/Assist operation.
A15 Pedestrian rated access cover and frame is included, additional cost apply for upgrading to either B125 medium duty, D400 heavy duty or recessed for block paving. Access covers and frames are supplied lose and should be independently supported over the pump chamber by others.
We are able to provide details of our Service Schedule; this is required to maintain your pumping station in its optimum condition.
SPSE Service scheme provides for regular visits throughout the year and includes for labour and travel. Any additional parts and materials are charged at the quoted price, Any parts replaced during the first 12 months, as a result of normal wear and tear, are covered under our standard warranty replacement.
|Wet Well Construction||GRP Chamber|
|Wet Well Diameter||1000mm|
|Chamber Depth||2.0M as standard (900MM - 6.5M deep) available on request|
|Pump Station Pipework||40mm Galvanised Pipe Work (uPVC, ABS and Stainless Steel) available on request|
|Pump Station Valves||40mm BSP NRV's / 40mm BSP Gate Valves|
|Pump Discharge||11/4" BSP|
|Access Cover||Pedestrian Rated - A15 additional options available on request|
|Opening Size||600mm X 600mm|
|Number of Pumps||Two DN32 Discharge|
|Pump Arrangement||Submersible Pedestal Mounted C/W Guild Rails Assemblies|
|Power Supply||415v, 3Phase 50Hz or 220v, 1Phase 50Hz|
|Control Panel||Standard Twin Pump Control Panel, Full Specification, Run & Tripped Indication, Hand/Off/Auto Switches Mild Steel IP55 Rated Enclosure High-Level Alarm (sounder + indication) + Mute + VFC|
|Duty Regime||Duty/Standby or Duty/Assist|
|Level Control||4 No. 10mtrs Floatswitch Control System additional control options available|
Above Equipment Supplied as Standard
We can supply explosion-proof submersible pumps and electrical equipment at additional cost.
Site attendance in which to complete mechanical and electrical installation works to pumping station plus commissioning systems once the electrical supply has been installed just complete the form below and we will contact you to arrange a day to suit your schedule.
Additional cost may apply for returning visits.
Cabling for both pump power and float controls with IP66 junction boxes, as required should power location, control panel be over 5-metres from pump station.
Additional costs apply.
Kiosks are manufactured from 2mm-zintec sheet steel to BS6687-1968 (chromate washed - substrate BS1449 -2.5 microns), the kiosks are press formed and welded construction to IP55 of BS5490 to give good earth continuity.
The following extras can be fitted as an extra option
We also provided other materials of construction (314 and 316) stainless steal and different sizes, contact us for further details
Access Covers A15 - 44mm Deep supplies as standard
Additional cost apply for upgrading to either B125 medium duty or D400 heavy duty access covers
Additional costs may apply.