SPSE 1220/50 Single Pump - Packaged Pump System

Available From £3,560.00 EX VAT

SPSE/1250/S/50 GRP Single Pumpset - Packaged Pump System

âSPSE 1250 rangeâ GRP packaged pump station for collection and pumping of domestic surface, wastewater water, foul and sewage from developments or areas where drainage by gravity is not possible.


  • Basements
  • Underground car parks
  • Domestic or commercial properties
  • Annex, play rooms, extensions or areas below sewer level
  • Domestic or commercial building extensions
  • Liftshaft
  • Service stations
  • Wash down areas

SPSE 1250 pumpstation

SPSE1250 Range of GRP 'Packaged Pump Station' installed with 50mm galvanised steel pipework, 50mm non return valve and gate valve, pump chain, three floats switches, single pump control panel, guide rail pedestal mounted pumpset with upto 50mm solids handling for quick and easy removal of pump only for servicing or cleaning.

1.25mtr Dia x 2.0mtr Deep GRP Chamber as standard additional depths available on request, up to 6.5mtrs deep minimum tank depth of 1.35 meters.

Single Pump, control panel configured for duty only operation.

A15 Pedestrian rated access cover and frame is included, additional cost apply for upgrading to either B125 medium duty, D400 heavy duty or recessed for block paving. Access covers and frames are supplied lose and should be independently supported over the pump chamber by others.


We are able to provide details of our Service Schedule; this is required to maintain your pumping station in its optimum condition.

SPSE Service scheme provides for regular visits throughout the year and includes for labour and travel. Any additional parts and materials are charged at the quoted price, Any parts replaced during the first 12 months, as a result of normal wear and tear, are covered under our standard warranty replacement.


Contact Number

Company Name
Email Address

Wet Well Construction GRP Chamber
Wet Well Diameter 1250mm
Chamber Depth 2.0M as standard (1.35M - 6.5M deep) available on request
Pump Station Pipework 50mm Galvanised Pipe Work (uPVC, ABS and Stainless Steel) available on request
Pump Station Valves 50mm BSP NRV / 50mm BSP Gate Valve
Pump Discharge 2" BSP
Access Cover Pedestrian Rated - A15 as standard, additional options available on request
Opening Size 600mm X 900mm
Number of Pumps One DN50 Discharge
Pump Arrangement Submersible Pedestal Mounted C/W Guild Rail Assembly
Power Supply 415v, 3Phase 50Hz or 220v, 1Phase 50Hz
Control Panel Standard Single Pump Control Panel, Full Specification, Run & Tripped Indication, Hand/Off/Auto Switch Mild Steel IP55 Rated Enclosure High-Level Alarm (sounder + indication) + Mute + VFC
Duty Regime Duty Only
Level Control 3 No. 10mtrs Floatswitch Control System additional control options available

Above Equipment Supplied as Standard

We can supply explosion-proof submersible pumps and electrical equipment at additional cost.

Should you require further information regarding any of our products or services we offer, call: 020 8991 6650.

Cant find what youre looking for ? click here to email us your requirements

Optional Extras

Pump Station Commissioning

Site attendance in which to complete mechanical and electrical installation works to pumping station plus commissioning systems once the electrical supply has been installed just complete the form below and we will contact you to arrange a day to suit your schedule.

Pump Station Pre-Commissioning Site Check List

Pump Station Installation Guide

Additional cost may apply for returning visits.


Cabling for both pump power and float controls with IP66 junction boxes, as required should power location, control panel be over 5-metres from pump station.

Additional costs apply.


Kiosks are manufactured from 2mm-zintec sheet steel to BS6687-1968 (chromate washed - substrate BS1449 -2.5 microns), the kiosks are press formed and welded construction to IP55 of BS5490 to give good earth continuity.

  • Two Kiosk lifting bracket
  • Wooden backboard
  • 14mm floor fixing
  • Door stay
  • Flush 7mm triangular lock
  • Door brackets to facilitate the fitting of a Yale lock
  • Full height unistruts at rear of each section
  • Internal hinges
  • Earthling points

The following extras can be fitted as an extra option

  • Ventilation louvers
  • Cat flap
  • Generator connection
  • Anti-condensation heater and thermostats
  • Plinth

We also provided other materials of construction (314 and 316) stainless steal and different sizes, contact us for further details

Access Covers

Access Covers A15 - 44mm Deep supplies as standard

  • Light duty single or double seal solid top manhole cover and frame in grey iron manufactured to BS EN124 Class A15
  • EN124 third party quality assurance accreditation
  • Single seal or double seal
  • Closed keyways

Additional cost apply for upgrading to either B125 medium duty or D400 heavy duty access covers

Fix Line / Dial-Out Telemetry

Dial-Out Telemetry (using clients Fix line) or GSM module (subject to service provider coverage) incorporated within control panel or retro fitted to existing pump control panel

Pump Station Servicing

Service Contracts - Scheduled annual visits to service pump station, arranged visits within calendar month excluding call-outs charged at standards rates.
  • User friendly on-line service system *Login Online*
  • Service history available on-line
  • Service reminders sent via e-mail
  • Engineers reports filed on-line and e-mailed - normally within 24hrs
  • Our own engineers available 24-7/365 for emergency call-outs

Operation & Maintenance manuals to Southern Pump Services standard format.

Additional costs may apply.

Should you require further information regarding any of our products or services we offer, call: 020 8991 6650.

Cant find what youre looking for ? Click here to email us your requirements


Contact Number

Company Name
Email Address

Residential Customers



Local Authority




New Building Developments

Industrial Estates

Call Our Sales Team Now: 020 8991 6650